EFFI-Lase V2 optical configurations.

- LED cards * -

* Depending on the pattern to be projected

Card Line LED Square LED Square LED
2 drivers
Square LED
3 drivers
XXX : part number card LX1 MX1 MX2 MX3

Part numbers :
Compact : EFFI-LASE-CPT-XXX...
Passive : EFFI-LASE-PSV-XXX...


- Available wavelengths -



Color UV Blue Green Red IR White
(T°= 5500 K ± 500 K)
YYY : wavelength (nm) 385 395 405 465 525 625 850 000


Part numbers :
Compact : EFFI-LASE-CPT-XXX-YYY...
Passive : EFFI-LASE-PSV-XXX-YYY...


- Masks -


> 3D Profilometry

Mask Representation of a 3D profilometry mask of 1 line at 50μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 1 line at 20μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 1 line at 10μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 3 lines at 50μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 3 lines at 50μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 5 lines at 50μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 100 lines at 45μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 22 lines at 50μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 1 line at 5μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 2 lines at 50μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 1 line at 50μm & 1 line at 250μm for EFFI-Lase-V2. Representation of a 3D profilometry mask of 1 line at 75μm & 40 lines at 45μm for EFFI-Lase-V2.
ZZZ : part number mask L01 L02 L03 L04 L05 L06 L07 L08 L09 L11 L13 L41
Designation 1 line 50µm 1 line 20µm 1 line 10µm 3 lines 50µm 3 lines 50µm 5 lines 50µm 100 lines 45µm 22 lines 50µm 1 line 5µm 2 lines 50µm 1 line 50µm
1 line 250µm
1 line 75µm
40 lines 45µm
Line length (mm) 13 13 13 13 13 13 13 13 13 13 13 13
Step between each line (µm) / / / 500 200 750 67,5 / 500 500

> Stereovision

Mask Representation of a stereovision mask of rounds on a surface of 10x10 mm² for EFFI-Lase-V2. Representation of a stereovision round mask on a surface of 13x13 mm² for EFFI-Lase-V2. Representation of a Stereovision mask of a grid of 40x40 lines of 50μm on a surface of 10x10 mm² for EFFI-Lase-V2. Representation of a Stereovision mask of a grid of 50x50 lines of 50μm on a surface of 13x13 mm² for EFFI-Lase-V2. Representation of a Stereovision mask of 50x50μm squares on an area of 10x10 mm² for EFFI-Lase-V2. Representation of a stereovision mask of a scatter plot with a density of 50% on a surface of 12.8x9.6 mm² for EFFI-Lase-V2. Representation of a Stereovision mask of a scatter plot with a density of 17% on a surface of 12.8x9.6 mm² for EFFI-Lase-V2.
ZZZ : part number mask G01 G02 G03 G04 G05 C02 C03
Designation Round Ø50µm Round Ø50µm Grid 40*40 lines 50µm Grid 50*50 lines 50µm Square 50*50µm² Cloud of dots : density 50% Cloud of dots : density 17%
Pattern surface (mm²) 10x10 13x13 10x10 13x13 10x10 12,8x9,6 12,8x9,6
Step between each pattern (µm) 50 50 50 50 100 / /

> Alignement

Mask Representation of an alignment mask of a 50μm cross for EFFI-Lase-V2. Representation of a 50μm concentric circle alignment mask for EFFI-Lase-V2. Representation of an alignment mask of a square of 50μm for EFFI-Lase-V2.
ZZZ : part number mask A01 A02 A03
Designation Cross 50µm Concentric circles 50µm Square 50µm
Line length (mm) 13 / 10


Part numbers :
Compact : EFFI-LASE-CPT-XXX-YYY-ZZZ
Passive : EFFI-LASE-PSV-XXX-YYY-ZZZ

Possibility to buy only the mask, see part number here


Compared to its predecessors EFFI-Lase et EFFI-Lase Power, EFFI-Lase V2 allows to interchange masks.


> How to change the mask ?


In order to change the mask of your EFFI-Lase, you first have to get a wrench. Then, you will have to unscrew the ring used to maintain the mask of EFFI-Lase. Once the ring is unscrewed with the wrench, you must remove the ring from the EFFI-Lase.
1) Spanner wrench * 2) Unscrew the ring 3) Remove the ring
Now that the ring is removed carefully remove the mask and place the one of your choice. After positioning the new mask, be sure to reposition the ring. Finally, tighten the ring on the EFFI-Lase with the wrench.
4) Change the mask 5) Interpose the ring 6) Screw the ring

* To change the mask, it's necessary to order an EFFILUX Spanner Wrench

- C-mount objectives -


Diagram showing the dimensions of the lenses used by the standard EFFI-Lase-V2 for machine vision and quality control.

EFFO-OBJECTIVE-0007
HF12.5SA-1
EFFO-OBJECTIVE-0008
HF25SA-1
EFFO-OBJECTIVE-0009
HF50SA-1
EFFO-OBJECTIVE-0010
HF75SA-1
Focale Distance (mm) 12.5 25 50 75
Diaphragme Apreture
F1.4 – F22
F1.8 – F22
View Angle (HxV) 38°47’ x 29°35’ 19°58’ x 15°02’ 10°03’ x 7°33’ 6°43’ x 5°02’
Filter Mount M49x0.75 M49x0.75 M49x0.75 M49x0.75
L x Ø (mm) 68.5 x 51 mm 75.5 x 51 mm 55.5x51 mm 76x51 mm

EFFILUX recommends to use an objective for 1 inch sensor for large masks, such as clouds of dots.
Objectives are not included with the projectors. EFFI-Lase V2 is equipped with a C-mount (M25.5). Contact us if necessary.



Related items

Datasheet

PSV CPT

User manual

PSV CPT